BATALEON Boss 157

490.00

Svuota
COD: N/A Categoria: Tag: , ,

Descrizione

BATALEON Boss 157

We introduced the BOSS last season as the GTI version of the EVIL TWIN: Same shape philosophy but with some extra carbon trickery for extra pop, control and stability while keeping that ET mid flex we all love. This is achieved by placing crossed carbon stringers under the binding area. These torsionally reinforce the board without making it stiffer longitudinally. It makes this board more stable at high speeds and on landings and add explosiveness to your pop! The BOSS is based on TWIN TBT which has a wide central flat base for jibs and solid landings. It makes the BOSS perfect for attacking jumps in the park or backcountry and for allover high speed blasting and Mach speed landings.

Triple Base Shape

shape_jib

Park 3BT to be playful yet stable with a wide centerbase, slight camber and true twin shape to perform in terrain parks around the globe. The edge uplift areas start mid-binding and extend towards the tips for a loose feel with less bite. The wide centerbase on the other hand helps with stability off lips, on landings, in presses and at high speeds.
  • Symmetrical nose and tail shape
  • Wide centerbase

Terrain

7JIBS

9PARK

10FREESTYLE

8ALL MTN

7POWDER

Stiffness

 5

Level

Beginner Advanced Expert Elite

Woodcore

Dual density full wood core composed of poplar with beech running tip to tail along the insert packs. The added beech hardwood strengthens the board’s backbone under the bindings and produces more pop from tip to tail while still offering a comfortable lateral flex.

Woodcore v-core

Our full-length wood V-Core Profile has material milled out between the inserts to create a highly maneuverable and natural flexing feel between the feet. Under the bindings and towards the tips is normal thickness for strength to load up pop and put down landings.

Base

Hard and fast. Our sintered base material is tough stuff and its microscopic pores retain wax nuggets for a slick slide. To get the maximum benefits of a sintered base it needs to be waxed regularly. We finish ours with a proper hot wax before they leave the factory.

Layup

Our tri-axial or three-way fiberglass is a weave of fibers in three directions: 45, 0 and -45 degrees. It’s like our bi-ax layup, but with added fibers running tip to tail. This stiffens up the board and adds more snap, while also offering better edge control and grip. The added strands of glasses make boards more aggressive and more responsive overall.

Extra layup

Carbon adds explosive snap, precise control, smooth dampening and it’s feather light. We use it to enhance the ride of our high-end boards. By placing Carbon stringers in key areas of the board we are able to increase the connection between the rails of your board making it feel more responisive

layup_4

Layout

By placing carbon slabs in an X shape under the bindings it magnifies ollies, strengthens the binding area for big landings and gives more precise foot control without overly stiffening the board torsionally or longitudinally.

Specs

152154156W157159W
contact length (cm)114116118119120
waist width (mm)249251264255266
setback (mm)00000
sidecut radius (m)7.807.908.058.108.15
inserts2424242424
stance width (mm)500-620505-625510-630510-630520-640

 

Informazioni aggiuntive

AttributeInformation
misura

157